PXA270 SO-DIMM Single Board Computer QUANTUM
The 520MHz PXA270 QUANTUM processor module and Baseboard provide a fast-track core to your next embedded project.
The QUANTUM Baseboard is a design platform providing real world connectivity for the QUANTUM module including RS232, USB, Ethernet, audio, video, CompactFlash and much more.
Full schematics to the QUANTUM Baseboard are included, allowing either you or Eurotech to custom design your own platform incorporating only those features from the baseboard required for your application.
When a high performance and cost-effective solution is needed for your next integrated embedded project, adopting the QUANTUM offers an accelerated route to market by eliminating the time and risk involved in the complex design of the processing core, leaving you to concentrate on the application code and I/O design unique to your requirement.
Features
Processing unit
312 or 520MHz PXA270 processor
64MB SDRAM
256kB CPU SRAM
32MB soldered Flash (64MB option)
Battery backed RTC (off-board battery)
Watchdog timer
Suported OS
Embedded Linux - Windows CE 5.0
Drive Support
IDE interface (not compatible with conventional HDD)
MMC/SD/SDIO interface
CF Interface bus
Graphics and Audio
Video controller supporting STN & TFT displays up to 640 x 480
- 4-wire analogue resistive touchscreen support
- AC97 compatible CODEC with line-in, line-out and mic.
Communications & IO
3 x standard serial ports
2 x high speed serial ports
2 x SSP (synchronous serial protocol) ports
Up to 78-bit GPIO (depends on what interface used)
1 x USB 1.1 host port
1 x USB 1.1 host/client port
I2C bus
2 x PWM outputs
Other features
JTAG debug and test interface
Form factor
SO-DIMM factor (67.6mm x 50mm)
Power Requirements
3.3V DC, 0.5A typical
Operating temp.
Operating Temperature -20 to +70ºC (-40 to +85 option)
