i.MX31 TurboG5 Module
A low power embedded computer-on-module in a small form factor, the Turbo G5 module is the ideal solution for computational or image processing performance applications, delivering a powerhouse of features and options. Based on the Freescale i.MX31 processor, the Turbo G5 module offers hardware vector floating point for applications requiring extensive computations at fast execution times. The 2-D and 3-D graphical capability including support for OpenGL-ES and Direct3D-Mobile allow for comprehensive and quick development for multimedia applications. With this broad list of specifications, the Turbo G5 module is an ideal solution for a range of embedded applications such as hand-held devices, transportation, and infotainment.
The Turbo G5 is mounted onto a carrier board to bring out a comprehensive range of I/O and communications ports. The carrier board can be easily customized (by Eurotech or another third party) to meet unique application requirements while reducing product time-to-market and optimizing costs. Furthermore, the Turbo G5 module can be easily scaled across several carrier board footprints so that OEMs can get the most out of product designs.
Features
Processor
Freescale i.MX31 @ 532MHz
Form Factor
Module dimensions 2.9 x 1.8 inches (74 x 46 mm)
Memory
128 MB of Mobile DDR (supported up to 256 MB)
32 MB of Flash (supported up to 64 MB)
Graphics/Video
Hardware video acceleration encoder 2-D and 3-D graphics with OpenGL-ES and Direct3D-Mobile Backlight connector with PWM + ON/OFF controlled by software
Carrier Board Expandability
One 10/100BAaSE-T Ethernet port
One CAN 2.0 interface
Two interfaces
One I2C interface
One SPI interface
One LCD interface
One Camera Sensor Interface
One USB 2.0 host port (H/F/L speeds)
One 2.0 On-The-Go function port (H/F/L speeds)
One AC97 Codec
128 MB NAND (expandable)
Three GPIO
Four digital inputs and four digital outputs
One 8x8 keypad interface
Three UARTs
One CompactFlash® slot
One SD/MMC card slot
Options for:
o Four UARTS and two SD/MMC card slots
o Five and two SD/MMC card slots (no OTG)
Support for ZigBee and GPS modules from Eurotech
Standard carrier board dimensions 4.5 x 6.5 inches (115 x 165 mm)
Operating Temp
Commercial temperature 0° to 70 C°
(contact factory for extended temperature options)
